NRG Vault PV500 Power Station: USB & DC Output Guide

Created by Punit Kanwar, Modified on Mon, 3 Feb at 12:07 PM by Punit Kanwar

Question: How do I use the USB and DC outputs on the NRG Vault PV500 Power Station?

Answer:

Turn on the Power Station: Press and hold the Main Power Button for 3 seconds.
USB Output:
- Tap the USB ON/OFF switch to enable USB ports.
- Connect your device to USB-A (QC3.0) or USB-C (PD100W & PD30W).
DC Output:
- Tap the DC ON/OFF switch to enable the 12V car socket and DC5521 output.
- Connect your device to the car socket or DC5521 ports.

⚠️ Note: Ensure your device’s power requirements do not exceed the port’s rated power.