NRG Vault PV500 Power Station: AC Output Guide

Question: How do I use the AC output on the NRG Vault PV500 Power Station?

Answer:

1. Turn on the Power Station: Press and hold the Main Power Button for 3 seconds.
2. Connect AC Devices: Plug your device into the AC outlet.
3. Activate AC Power: Tap the AC ON/OFF switch to enable AC output.
4. Turn Off AC Power: Long-press the AC ON/OFF switch to disable AC output.

⚠️ Note:

• Maximum AC output power: 500W.
• Overload protection activates at 550W for 30 seconds.
• If total power exceeds 500W, the unit will shut down.